LED lighting for Anycubik Kobra 2 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED lighting for Anycubik Kobra 2 Pro - design consisting of 6 elements. Adapted to 3 LED strips with a length of 21 cm.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 834
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
To do something, it turned out that it was dark next to the printer. I came up with a lamp mounted on a printer. In my case, I powered it with 3 AAA batteries, but you can connect LED strips to the power supply.
LED lighting for Anycubik Kobra 2 Pro - design consisting of 6 elements. Adapted to 3 LED strips with a length of 21 cm. and 1 cm wide.
The STL file contains all the necessary elements. After printing, gluing the LED strip taken from the "emergency exit" lamp onto double-sided tape and connecting the wires to the switch, I glued all the elements together with glue. You can connect a power supply or batteries.
You can additionally decorate it with an inscription that is in a separate file
I will be pleased if you show me your implementation and any possible modifications.