Bernzomatic Firepoint carry stand and adapter

Bernzomatic Firepoint is a good torch, but major downside for me is that there is no place to grab the base with one hand and carry it.

So I designed this gem, which adds tool holder to the base that can be used as a "handle".

Except the 3D printer and filament, you will need few bolts and nuts to put it together:

3x M5 screw (hex head) at least 18mm long

3x M5 nuts for above screws

2x M3 screw (countersunk head) 40mm long

2x M3 nuts - these are little tricky to insert, but I rather have tight fit than loose fit

M3 screws will be used to join two 3D printed parts and M5 are used to join Firepoint base to the 3D printed base.

I also designed adapter for EU Propane-Butane bottles CFH, but you will need gas adapter (US to EU) - I know temperatures will be lower with Propane-Butane mix, but I have plenty of bottles on stock and they are cheaper here than original butane ones.

My print settings:

- printer: Prusa MK4S
- layer height: 0.2mm
- sheet: Powder coated PEI
- nozzle diameter: 0.4mm
- print orientation: as on the picture
- material: Elegoo Rapid PETG black
- supports: no need
- perimeters: 3
- solid layers (top/bottom): 5/4

I can also sell my source files if you want to save some time designing variations.

CAUTION:

DO NOT LEAVE THE FIREPOINT FLAME TURNED ON IN THE HOLDER WITHOUT ADULT SUPERVISION!