1 / 1
Tube rings for Newtonian (d=126mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tube rings for 3-4.5" Newtonian (d=126mm).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Tube rings for my 76mm Newtonian. Diameter of the tube is about 126mm, so the rings should fit larger tubes also. The dovetail plate can be attached by 1/4" screws. Hole size is sufficient to allow to sink 3/8" to 1/4" metal adapter in using a soldering iron.
I tapered mine with some felt lining on the inside. This allows a better fit and protects the OTA from scratching.
The rings are split three-ways to fit my Monoprice Select Mini V2. Connect them with M6 screws and nuts.
No supports needed.