Onewheel XR (ish) desk toy.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a daft Onewheel XR (ish) desk toy. Fun and easy wee project.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
You need to print:
2 x ow rail
2 x ow foot plate
1 x ow shaft
1 x ow skid plate back
1 x ow skid plate front
1 x tire (two to choose from)
EDIT: Added a rounder version of the tire. Options ;)
I printed the tire in TPU, foot plate in Wood filled PLA, Skid plates in abs and rail and shaft in PC CF. Only part that needs support is the shaft (print it standing upright).
You will need two 608zz bearings and super glue for assembly.
I also added some sand paper (as grip tape) using double sided tape.
Assembly:
1. Assemble the wheel, pop bearings onto the shaft, then insert it into the tyre.
2. Insert end of the shaft into one of the rails.
3. Glue skid plate front and skid plate back to rail from step 2.
4. Glue the other rail.
5. Glue both footpads.
6. Add some high grit sandpaper as grip tape, use double sided tape.
7. Never cook drunk.