Involute Gear Extruder Visualiser for MK3S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extruder visualiser in the shape of proper involute gear
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 374
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Gears are cool!
I'd seen a few axis visualisers and such like in the shape of “gears”, but most of them were artists impressions of gears (rectangles or trapeziums stuck on the outside of a circle) rather than proper involute (or cycloidal) form gears and that sort of thing irritates me, so I thought I'd design my own.
I've made a set to include a control knob and visualisers for X, E and Z axes. All are module 2 gears. You can see them all in the last photo. This is the extruder visualiser and has 18 teeth (matching the X-axis visualiser and larger control knob). Like many other extruder visualisers, it needs an 8×3 mm magnet to attach it to the extruder motor. There's a small brim to help get the magnet in the right place.
Links to all the gears are here:
- Collection: https://www.prusaprinters.org/social/187908-dral/collections/106521
- Extruder Visualiser: https://www.prusaprinters.org/prints/117065-involute-gear-extruder-visualiser-for-mk3s
- X-Axis Visualiser: https://www.prusaprinters.org/prints/117066-involute-gear-x-axis-visualiser-for-mk3s
- Z-Axis Visualiser: https://www.prusaprinters.org/prints/117069-involute-gear-z-axis-visualisers-for-mk3s
- Control Knobs: https://www.prusaprinters.org/prints/117060-involute-gear-control-knobs-for-mk3s
There's a video of the visualisers working here: