1 / 5
Miele Vacuum Cleaner Telescopic Tube Clip Replacement — zdjęcie 1
1 / 5

Miele Vacuum Cleaner Telescopic Tube Clip Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,21 € – 0,25 € netto (bez VAT)

Dla pliku: hose_clip-Body_v5_0.4n_0.15mm_PETG_MK4S_19m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,23 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
19,2 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Inner part of the clip for the telescopic stainless steel tube of Miele vacuum cleaners.

Ocena
0 / 5
Polubienia
3
Pobrania
34
Wydruki
0
Wyświetlenia
230
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Inner part of the clip for the telescopic stainless steel tube of Miele vacuum cleaners. Might work with the non-telescopic version too.

PETG recommended. Prints fine without supports on a MK4S using the print settings in the 3mf file.

Use "Classic" perimeter generator in PrusaSclicer to avoid jagged lines on the fine edges.

Updated 01/2026 with tighter tolerances to ensure alignment retention and more reliable hose attachment.

The outer part of the clip can be found here (it's not only for the floor nozzle despite the name): https://www.printables.com/model/730037-miele-vacuum-cleaner-floor-nozzle-clip-replacement

 

Tagi