Philadelphia Eagles Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Clock celebrates the US football team. It does not require an MMU.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
Maker Notes: Philadelphia Eagle Clock
Print Settings
- 0.15mm Layer Height
- 15% Infill
- Textured PEI Plate (PRUSA)
- Sized for an MK4 printer
PLA
- Top:
- ESUN Basic Green – Layer 1, 2h 34min
- ESUN Pine Green – Layer 2, 32 min
- PRUSA Galaxy Black—Layer 3, 21 min
- PRUSA Silver – Layer 4, 20 min
- ESUN Cold White -- Layer 5, 14min
(Times may vary)
- Bottom:
- PRUSA Galaxy Black
Clock Movement
TIKROUND Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement; 5mm Thread Length, 18mm Shaft Length (Amazon).
Notes
This is a large print. It does not require an MMU- there are 4 filament changes. I used Nanopolymer Adhesive (Vision Miner) to promote adhesion and had no detachments.
The clock was designed in Fusion 360. A f3d file is attached and is partially parametric. A 3mf file with filament changes is also included. You can separate the parts in PRUSA Slicer for Printing.
Print the top and bottom parts. Install the clock movement – you may need to trim the Eagle a bit. Glue the bottom to the top with Epoxy. Install the hands and battery. Set the time.
Go Eagles!!!