Dual Wireless Charging Stand - iPhone 12 Max & Apple Watch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice little stand that tidily routes the cables behind.
- Ocena
- 4,25 / 5
- Polubienia
- 98
- Pobrania
- 726
- Wydruki
- 4
- Wyświetlenia
- 5702
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey people,
Made a neat little stand for charging and displaying my iPhone 12 Max and Apple watch, thought I'd share.
It nicely fits the 12 Max as said with enough room in the cradle if you have case on too. I guess it will fit the 13 max but haven't tried. If you don't have a Max version, it will still work, but while charging your phone wont sit in the cradle as the magnet is lower down (proportional to the phone size).
It features a cut out at the bottom of the cradle so you can still swipe upwards (if you need to use it as an office stand - so everything is still accessible). Has a horn shape to project sound from the phone at the bottom (works surprisingly well!) and just enough room should you want to connect it via a cable.
The charging cables pass through the stand first then slot sideways to sit flush with the front. Cables then clip into the guides to exit straight out the back. If needed I can alter the guides to exit left or right along the bottom.
When designing, I wanted to minimize overhangs and the need for supports. Check the pictures for recommended rotation, brim and supports. Left and right versions within the files depending which side you want the watch. Direction indicates which side the watch is on.
Notes
I have a version without the watch charger on if anyone is interested. Just DM and I'll list it too
Sticky pads or a tiny bit of bluetac on the foot tabs stops it from sliding
Enjoy