MTG TCG Card Divider Organizer with WL-1050 Address Label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MTG TCG Card Divider Organizer uses WL-1050 Address Labels as the size at the top
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
First stab at a card divider for a friend of mine.
Figured I'd make it a bit more standard with a Address Label place.
So it's 47mm x 15mm at the top which is enough room for a standard WL-1050 Address Label to stick to it, so you can just print it out from your regular 2d printer and stick it on.
The card size is 67x92 underneath which is 2mm greater on each side than a standard MTG card size which is 63x88.
The hex pattern was just to save some filament, will most likely change the design to use the MTG logo maybe, i don't know we'll see. Still learning F360, so on to the next one.