Zeromouse Inspired Shell for WLMouse Beast X Original (24.6g in PLA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a prototype I put together for a lightweight shell made to fit the pcb out of the BeastX Original
- Ocena
- 3 / 5
- Polubienia
- 7
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 885
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Just a warning: The ergonomics on this weren't great in my testing, but I also haven't used any other pure fingertip grip mice similar to the Zeromouse.
This only fits (as far as I'm aware) the original BeastX pcb, although the new 8k ones may work. I don't have a newer one to test it out. Putting the PCB in can be a little tricky, although if you print it out of PLA it should be strong enough to resist snapping when you have to bend the paddles or the scroll wheel support. Be careful with the scroll wheel supports still, as I had them permanently bend one time when putting the pcb in and out a few times. I'll be continuing to work on this every so often. For this prototype I also recommend using something like electrical tape to secure the battery to the back of the sensor.
I just used mostly default Cura settings to print this out of black PLA.
0.15mm resolution
20% infill - gyroid
Tree supports (I recommend printing it vertically with the click plates facing towards the print bed).
This model is in no way affiliated with the Blade or other models from Zeromouse, I just use that term since it makes these styles of cases easy to search for.