Lock Rekeying Parts Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This box holds all the pins nicely sorted and easily accessible as well as the tools to rekey a lock with a tight lid.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I needed to rekey a few locks in the house and found a cheap toolset on Amazon. But all the pins came in little plastic bags which are annoying to deal with. So I created a storage container were all the pins can be nicely sorted in. And it holds the tools like the follower and the keying gage. An important design consideration was to have a lid that is tight and stays in place so that the little pins don't fall out or get mixed up. I designed a sliding lid with small internal lips that prevent it from opening. To slide it open you have to slightly pull up on it.
I printed it on my Prusa MK3S+ in PLA+ using the 0.15mm QUALITY setting.