CD Digipak mount (Cardboard flip-out case) for framing or hanging
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This should work with any Digipak, if you have music or games that came in this fold-out cardboard format.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently got my John Romero signed copy of Quake back and it needed to go on the wall beside my 8MB Voodoo 2. To affix it to the backing board, without ruining the cardboard "Digipak" CD case, I modelled 4 petit corner fittings to hold the case, with an additional 1mm thick cavity in each, which a 0.96 thick backing plate can slide into at each corner. I glued each corner by painting a little superglue on before insertion into those 1mm cavities. Once dried, I used some heavy duty double sided tape to put the CD into its display position on the board, ready to presented behind glass. This should work with any Digipak. If you have music, singles or albums, or games, that came in this fold-out format, you can now elegantly show them off.