1 / 1
SV08 PTFE tube support for tophat from Nadir @ CN3D
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple support for PTFE tube so it doesn't dangle around or get into the corner
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (36)Powiązane
Made for Sovol SV08 TOP HAT Side Exhaust by Nadir@CN3D
Better version with smaller footprint that doesn't require any drilling
Simple support for PTFE tube so it doesn't dangle around or get into the corner
Printing:
If you print abs/ASA then print it from abs or ASA, otherwise PETG will do
4 walls, 5 bottom and top layers, 0.2 height, 20% infill

It doesn't need supports but can benefit from some.
You will need 2 x 4x15mm screws