1x1 Gridfinity refined 2-ribbed bin with project_panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1x1 Gridfinity Refined bin with 2 ribs to fit panels. 3 different panel designs included, plain, breadboard and SSD1306.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 350
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
So I'm trying out a concept with this design - which featured in my OLED model here: https://www.printables.com/model/1172417-gridfinity-1x1-oled-display-ssd1306 I have added 2 layers of ribs around the bin. These will ‘click fit’ a 1mm deep panel. The top ribs are designed to allow you to push through them to get to the second layer if you wish - and the second layer is designed (with a slightly larger bottom rib) to prevent you from pushing the panel through it. There's a 1.5x8mm slot at the edge of every panel to get a screwdriver in to remove it as needed. I could have achieved the same with other fixings, but I felt that this was the most efficient on material, wasted the least space in the bins (so you could just use them as storage bins), and it's very quick to add or swap panels once you're used to it. The second layer was envisaged as somewhere to have a layer of components, below a top layer of controls or displays. Very happy to take feedback, or see others improve on this concept. I'll hopefully be posting more panel designs and new sizes shortly.
All of this should print without any supports. The panel and bin should already be in the correct orientation for printing.
The panels included in this first version are:
- A plain panel (drill your own holes and make it your own design if you're not into CAD etc), or use it as a template to add features to.
- A grid of 1mm holes spaced 2.5mm appart - perfect for electrical componets - easy to fit 16-pin ICs etc - either as a top layer for some breadboarding - or more likely to be used as the lower layer to organise a few bits for whatever is on the top layer.
- My SSD1306 panel that inspired this design, as featured in this model: https://www.printables.com/model/1172417-gridfinity-1x1-oled-display-ssd1306
Sub-component stuff:
Not a lot in terms of sub-components on this one.. these are the magnets I use for all my gridfinity stuff: https://amzn.to/3DFTKtO.
(Note: These are associate links, which means that they don't cost you any more, but I get a small cut if you purchase via these links. This isn't a big money-spinner, but I find it so useful to have sub-components linked in models that I download - so I know I'm getting exactly the right bits without much research, and it helps support my tinkering!).