Modern Flower Pot with Wood Dowel Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a flower put I designed that uses wood dowels as legs. This is my version of a mid century modern plant stand.…
- Ocena
- 5 / 5
- Polubienia
- 197
- Pobrania
- 378
- Wydruki
- 3
- Wyświetlenia
- 2997
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a flower put I designed that uses wood dowels as legs. This is my version of a mid century modern plant stand. But with the legs integrated into the flower pot. You can watch the build video at the link below. Legs are 1 1/8 inch dowels that can be bought at any Home depot. If you want to print the pot smaller. I suggest printing just a slice of the center and take it to the store to figure out what dowels fit the size your printing it at before printing the entire pot.
Added a new fun size for making mini pots.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
30%
Filament:
Prusament PLA or PETG Galaxy Black
Notes:
It is important to have a minimum of 3 layers perimeter to make sure the pot is water tight. A hole can be drilled on the bottom or modeled if you want a drain. I just fill the bottom with rocks for drainage.
Category: Decor