HC-SR04 ultrasonic sensor, wall support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HC-SR04 ultrasonic sensor, wall support
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 182
- Wydruki
- 1
- Wyświetlenia
- 1074
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This supports are designed to hold the HC-SR04 ultrasonic sensors to the wall.
It is ideal for monitoring the level of your tnaks or your wells. The two pieces are holded together with two screws and the cable of the sensors passes through a hole in the arm, that later hou can seal with hot glue or some silicone.
The piece has been designed with the idea of protecting the sensor from corrosion, since one of the main uses culd be measuring liquid levels.
After two years since i installed them my sensors are not corroded and still work perfectly.
I hope it's useful !!!