1 / 5
Hinge pins for STREET BASHER 3D PRINTED RC CAR 1/7
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bolts tend to wear out holes under load. This fixes that by replacing the arm bolts with M4 hinge pins.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
Summary:
Bolts tend to wear out holes under load. This fixes that by replacing the arm bolts with M4 hinge pins. The holes in CAD are 4mm so they need to be drilled out till the rods fit in snug but are still able to rotate.
Onshape assembly: https://cad.onshape.com/documents/fa135b052df6e2bdacac165d/w/55cde92bc01235597f7962cb/e/eaf57611d2b51ec417966961?renderMode=0&uiState=679dec737cffd73937fbaf9a
Hardware:
| Part | Size | Qty | Location |
|---|---|---|---|
| Stainless steel rod | M4x70mm | 2 | rear bottom inside |
| M4x68mm | 2 | front bottom | |
| M4x40mm | 2 | front top | |
| M4x38mm | 2 | rear bottom outside | |
| Washer | M2 | 2 | rear bottom outside |
| Socket Head Cap Screw | M2x6mm | 2 | rear bottom outside |
"Happy printing, and God bless, my friend."
— Bob Ross