Rookery Toolhead & V6 / Revo Six Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Gulsifer's Rookery fan shroud and V6-CHC clamp to suit a Revo Six or plain old V6 styled hotend.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU Lesser General Public License
I modified Gulsifer's fan shroud and V6 CHC clamp so that I could mount my Revo Six(clone) hotend to my rook.
Why a Revo Six? It was the hotend I had spare for this project (Rook MK1.1) and thought I'd share it for others who'd like to do the same.
Why not use the original author's long 4010 shroud and V6-CHC clamp? I wanted better placement of the 3010 fan to cool the hotend and alignment of fan ducts around the nozzle.
I included a few pics to show the fan shroud placement around the nozzle and where I cut the original model.
Note: I haven't tested an E3D V6 or J-head with this, but should work. Do your measurements beforehand.
Hope this helps!