1 / 2
Playmobil 3761 Mobilkran Replacement Crank and Gear + M3-Screw Reinforcement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a replacement crank with the original hex-shape to fit in the telescopic crane boom with gear
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
i needed a solution for the playmobil 3761 mobilkran. now the 2 telescopic crane booms can be used like original. the upper one is 25mm and the lower is 29mm. i also included the locking part from vialkoje but i did not modify it. you need one or 2 countersunk m3x16mm screws. one is mandatory for fixing the handwheel together, the second one is for stability.