Macintosh LC II power supply board for Meanwell RPT-60A
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Macintosh LC II power supply board for Meanwell RPT-60A
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I had a Macintosh LC II with missing power supply, so I bought a compatible Meanwell RPT-60A and designed an adapter with mounting holes, the IEC plug and power switch.
Note that this plastic print isolates the PSU, so you should ground the PSU board directly. See the yellow wire in the picture that ends above the monitor connector in the shielding.
This is a dangerous design! The original PSU is enclosed, but unfortunately, there's just not enough room to do so with the meanwell. Use it only if you know what you are doing.
Fusion 360 design attached.