Replacement Hinge Lid Pin for Beaba Baby Cook Solo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement part for the breakable pins holding the lid of the Beaba Baby Cook Solo (baby food maker)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
My friend Rachel broke the pins on the lid of her Beaba Baby Cook Solo. This is a simple replacement. She reports it has been working fine for the past week. (Note: There is no contact of this part with food, it is part of a mechanical assembly.)
This is a super simple model: really just a cylinder with the correct dimensions and a notch on the end. But handy if you need a quick replacement and don't want to model it yourself. The original part is injection molded and thus unnecessarily complicated.
No special print instructions needed. I used PLA, with 0.2 mm layer heights, printed tall-axis upright with no supports. Be sure to clean the print bed well with isopropyl alcohol so you have good print adhesion (ignore slicer warnings about this). There is a small screwdriver notch on one side (rotate it so this faces the top), which is present in the original part, but it not strictly necessary.