1 / 1
22 Short Adapter for Ruger BX-1 Rotary Magazine REMIX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter is a non-permanent way to adapt Ruger BX-1 rotary 10 round magazines to accommodate using .22 shorts
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (10)Powiązane
I took the original model from @PlinkerCAD_2291719 and removed approximately 0.8 mm from the inner diameter, and I shortened the height of the model 0.5 mm.
I found when I printed the original model the tolerance was too tight and the inner axel of the magazine could not rotate. This remix allows for a little slop due to expansion\contraction during the print.