4 Litres Airtight Container Filament Name Cardholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a device that holds cards that identify the filament stored in a 4 litres airtight container.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a device that holds cards that identify the filament stored in a 4
litres airtight container. This design is slightly curved to fit the end of
the container. The size of the cards are 42.3 mm x 76 mm, which corresponds to
a 1/3 of a 5 x 3 inches index card. A template that lets you print 3 cards per
index card is also included.
A brim is required. It should be printed upright without support. An infill of
20% is recommended.
This object's main web page is:
http://www.ctheroux.com/4-litres-airtight-container-filament-name-cardholder/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.