Another print-in-place tolerance test.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pratical tool for your modeling session.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another print-in-place tolerance test.
Print settings advice
Print it with the settings you usually use. This tool is made to test the tolerance for your print settings, not mine. Increase only the infill percentage at 15% and use 2 walls for a better longevity.
Material
Same as the print settings, use the material you want to test. (Don't test on flexible materials such as TPU.)
Post-Processing
Due to the design, you can press against each piece to free them. The bottom part of the plate allows each piece to move freely if the tolerance is correct.
If you encounter any issues while printing or have any questions about the model and its pricing, feel free to contact me via message or on my Instagram!
Happy Printing !
Patch Notes :
- V1.1 : Bigger writing, adding chanfer and fillet on the edge