Protean stock notched cover for 5mm steel rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No need to buy notched bar, put 5mm steel round bar into this notched print.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 49
- Wydruki
- 2
- Wyświetlenia
- 273
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
You could buy a Worker Blaster stock, or a copy of the Chinese factory part, or you could buy 8mm rods and grind and file like a hero, or you could buy 5mm steel round bar and put this printed notched cover on.
In the photo, the whole thing is being held up by 1 rod and it's not bending. I used 5x250mm stainless steel round bar. It cost like 2 dollars. M5 threaded rod is weaker.
You may need a hammer or glue to assemble it. Recommend printing it flat, with a brim.
---
Extra note if you're unfamilar with steel grades, you want stainless steel or it will rust. There are various grades, A2, A4, 302, 316, 304, 18/8 and 18/10 are all stainless, the name depending on where you live. Avoid mild steel.