Tarmac SL8 seatpost Varia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for holding your Varia on your Tarmac SL8 seatpost. Weight < 10g with 15% infill, M3x22 bolt and insert
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 485
- Wydruki
- 0
- Wyświetlenia
- 1808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU Lesser General Public License
This light mount holds your Varia on the seatpost of your Tarmac SL8 elegantly.
It weights only 9.8g with M3x22 stainless bolt, M3x5x4 insert and a 15% infill. Works fine with PLA if you like colors, but prefer PA-CF for durability.
Print the Garmin quarter-turn mount VERTICALLY. No supports are required.
You need to open the clamp with your hand to put the insert into place with the soldering iron. It won't break if you stretch it by hand a bit, no problem even with PLA but be sure to insert it right straight into the hole, otherwise you won't be able to secure the clamp by screwing it correctly.