1 / 6
19mm Walking stick plug
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The one thing I seem to damage but can find no replacement for is the plug that fits into the end of the walking stick.
I found without this the walking stick would push through the Ferrule. Most likely as my walking stick doubles as a sit to.
A simple design this fits my 19mm Flipstick.
The orginal is publicaly available on the Onshape website for all users.
I have also attached a stp file to help with changing.
Printed on a MK4s in a few Minutes
0.4 nozzle but i did use a lot of infill about 80% from memory