MonsterJam Truck Broken Wheel Adapter 2mm Axle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hub adapter for monster jam trucks, with 2mm axles. This has a 2.1mm hole to pop onto the axle and glue to the wheel.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Details
This hub adapter for diecast/plastic monster jam trucks, with 2mm axles. It is to repair wheels that have broken off or come loose. This has a 2.1mm hole to pop onto the axle and glue to the wheel. I was finding the center hole was shrinking slightly, so there should still be some resistance popping the adapter onto the axle, then the wheel over that.
I recommend glue to bond the adapter the wheel, then a few dabs of glue on the axle before you assembly the hub adapter to the axle. I used weld bond, but you can use any PVA glue or maybe even super glue. The pictures show the wheel style and looking at the model you will see how it pops into this style wheel to lock in place.
The specific truck model number is 2022 FMS 20805DFT. If you have any alterations I'd be happy to alter the model and re-publish with different dimensions. You can always remix the length of the 4 “keys” in openscad or onshape (or another modeling program) to change their interfacing depth. I noticed some other monster trucks have shallower pockets.
NOTES
Purchasing
If you don't have a 3D printer and would like to purchase this item, I would be happy to print and ship it to you. Send me a message on printables. Located in USA but will ship globally if required. Shipping will vary and affect cost.