1 / 5
3D printable 4" drone frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4" drone frame supporting 2205 motors. And terrible geometry!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 1119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
Introducing my first 3D printable drone frame! It supports 2205 motors, 25x20mm or 20x20mm stack mounting and O4 camera mounting at low cost while being rigid and strong enough to withstand crashes and without creating much vibrations. To assemble the frame (with motor and camera mounting. No stack mounting hardware here) you need 8 M3 nuts, 4 M3*16mm bolts, 4 M2*8mm bolts, 16 M3*10 bolts. The battery mounting on this frame is made out of zip-tie's (Keeping it low cost).