1 / 1
Holder for Stabilo fineliners (and other things)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just cut off unneeded at the top
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 59
- Wydruki
- 2
- Wyświetlenia
- 387
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Info
All credits to the original Author, buy him a coffee or tea ;)
All i did was to cut unneeded material at the top and provide print settings.
You can even throw things in the middle, still holds strong.
Holds all kind of writing utensil.
Printsettings
These worked fine for me and my Ender 3v2 with BMG and Manta mk2 duct.
Easy
use superslicer and look into the attached m3f
Change your Acceleration unless you have a sane number set in your printer firmware.
Manual
Perimeter: 3
Top layer:
| Perimeter | 3 | ||||||||||||
| Solid top layer count | 4 | ||||||||||||
| Solid botton layer count | 3 | ||||||||||||
| Base and normal layer height | 0.32 | ||||||||||||
| Infill | 10 % grid (only for the base) | ||||||||||||
| Gap fill | 100% | ||||||||||||
| Speed | up to you, but crank up gap fill Mine for reference
| ||||||||||||