Creality K1/C/SE/Max cutting blade base kit for any extruder.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete kit of cutting blade for any DIY extruder of Creality K1/C/SE/Max with unicorn nozzle.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 2080
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Complete kit of cutting blade for any DIY extruder of Creality K1/C/SE/Max with unicorn nozzle.
This kit contains of:
-base block;
-blade holder;
-unicorn filament guide washer;
-blade depressor (mounted on the left motor/belt tensioner).
If you are going to use any multi-material system (DIY like ERCF or stock one like Anycubic ACE Pro) you will need to add cutting blade and additional filament sensor to your extruder. So this kit can be used in any project, you can add it to any extruder you want (I'm using it with Cyclops).
If yop are using old Creality nozzle or Volcano heatoblock/nozzle kit - you can make this cutting block thinner, since Unicorn nozzle rises up on 5 mm above base.
For the complete assembly you will also need a return spring (can be taken from any ball pen), D2F-L microswitch with metal lever, steel ball and 18mm standard steel blade for construction knife.