Small battery beer crate 2x2 AAA SKADIS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Your favorite small battery crate, now on SKADIS!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Regular beer battery crate too large? Found a smaller one, but you want to put it on your Skadis board? Look no further! It's already done! I've added Skadis hook to a smaller battery crate, and adjusted a bit height for easier battery handling. It has 4 battery slots, should hold both AAA and AA (for whatever reason, as the original file was for AAA and I haven't changed the sizing)
Printed with supports to the hook only
PLA
Layer height 0.2
Noozle 0.4
Infill 15 and 20% seems to work great
Important! My print slid slightly in one axis, hence the weird line on the model in the photos. It's a minor thing, so I let it be. The model doesn't have that problem