1 / 6
REV Ritter Brüstungskanal / Kabel Kanal / Cable Duct Junction Box — zdjęcie 1
1 / 6

REV Ritter Brüstungskanal / Kabel Kanal / Cable Duct Junction Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Junction box for the 'Brüstungskanal' from 'REV Ritter'. I am using it for a relais-PCB to switch power outlets.

Ocena
0 / 5
Polubienia
3
Pobrania
19
Wydruki
1
Wyświetlenia
217
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

I needed a junction box to hold a small 5V PSU-Board as well as a Relais-PCB within an REV-Ritter cable duct. Here is an qick model for that. It can be fixated wihin the duct with the two T-Screws.

I left some space on the bottom of the box to allow some clearance for the mounting screws that hold the cable duct.

The two long channels can be printed with briding, only the area around the screw-holes and the clearance spaces on the edges needed some supports. I added an 3mf file with painted on supports. There is also an modifier for a solid 3mm baseplace within the box to allow the mounting of some standoffs or other screws.

 

Tagi