Mystery the Seahorse from SpongeBob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mystery the Seahorse from SpongeBob
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Mystery the Seahorse from SpongeBob
INSTRUCTIONS:
* Change the layer height to .16 mm and wall loops to 4
* After printing multiple sizes of this, I noticed that when I used tree supports and printed normally, the tree supports would sometimes pop-off the head and cause an uneven head. If this happens to you, print the seahorse on it's side. The side that you print it on will have a “topographic map look” to it. So, print on the side that is least visible if you have problems with tree supports. I just used tree supports because I have an easier time removing them.
* The purple flower is not part of this print but can be downloaded for free from Thingiverse then glued to the base; https://www.thingiverse.com/thing:3325378