1 / 3
Narrator & Tyler - Fight Club | Hueforge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I felt like putting a bullet between the eyes of every Panda that wouldn't screw to save its species.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
I felt like putting a bullet between the
eyes of every Panda that wouldn't screw to save its
species. I wanted to open the dump valves on oil tankers
and smother all the French beaches I'd never see. I wanted
to breathe smoke.
- Narrator
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 173.58x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Brown
At layer #13 (1.12mm) swap to Ruby Red
At layer #15 (1.28mm) swap to Yellow
At layer #19 (1.6mm) swap to Jade White for the rest.