1 / 3
Bike Race Number holder (O-ring band mount) — zdjęcie 1
1 / 3

Bike Race Number holder (O-ring band mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bike race tag holder that mounts to the seat post with standard O-rings (as used for Garmin computer mounts)

Ocena
5 / 5
Polubienia
9
Pobrania
106
Wydruki
1
Wyświetlenia
611
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This bike race number card holder originated as a design idea of a friend at Team Tracy ATX ( @teamtracyatx ).  He has given me permission to share my version of his design here.  He provided the concept draft, and I had some fun designing it into a parametric model that is quickly editable for specific post radius, post angle, hole size, hole position, hole spacing, card thickness, length, etc..  By angling it to match the seat post angle, it can also print on end for much improved tab strength.  The teardrop shapes on the thru-holes should be pointed upward for printing, to allow the holes to print nicely without support.  This design is intended to be quickly moveable from one bike to another because it is simply held in place by an O-ring or two.  The friction of the o-ring(s) on the post will maintain its position during use.

I followed his guidelines for hole size and spacing because I didn't have a race number card on hand to measure.  I understand that automotive push pins (of the correct size) are perfect for securing the card in place.

 

We've both run multiple successful prints in PETG, as well as hard TPU, and their team has been putting them to use.

Feel free to request any post diameters that I missed.  It is as easy as changing the parameter in CAD and re-exporting, so don't be afraid to ask.  Also, if the hole offsets or dimensions need adjustment, please let me know and I'll try to accomodate.

 

** Added a single hole design, in case 2 mounting holes aren't needed.

 

*Print on end with hole points oriented upward (as shown in the slicer image)

          -In use, it is installed the opposite way, with the points oriented downward, as shown in the photos-

Tagi