magnetic fishing set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i quickly created a fishing set, all the commercial ones had strange fish forms. Each of the fished has one 6x3 (6mm…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
i quickly created a fishing set, all the commercial ones had strange fish forms.
Each of the fished has one 6x3 (6mm diameter 3mm heigt) magnet embedded
(this was what a had on hand) should be a tight fit
The fishing rold uses a screw or bolt.
The fishes a svgs from:
https://svgsilh.com/de/tag/Fisch-5.html
you might have to scale down the rod if you bed is smaller than 300x300mm
Parts needed
either
- 10x 6mm x 3mm Magent (6mm diameter 3mm Height)
- 1x Bolt/Nut/Washer
or - 1x piece 6mm steel rod - cut 3mm discs
- 1x Magnet
and - 1x String
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Doesn't Matter
Supports:
Doesn't Matter
doesn't matter
Infill:
20%+
Filament:
many pla many
Notes:
just get it reasonable solid, super easy to print.
Category: Playsets