1 / 4
Cali-Cube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a calibration cube to test many things.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
I have made a scoring system out of 20 for it this is how it works:
- If the length of the part is ±0.1 mm of the initial 30mm it gets +3 points.
- If the inner diameter of the circle is ±0.1 mm of the initial 20mm it gets +3 points.
- If there is no ghosting it get +4 points, it if has slight ghosting it gets +2 points. if there is major ghosting no points are added.
- If there is no stringing +5 points, if there is minimal stringing +4 points, if there is some stringing +3 points, if there is a lot of stringing no points.
- If there are smooth walls without z wobble it gets +3 points.
- If the bridging is good it gets +2 points.
so please share your makes and your scores.
I got 14/20