LayersFactory
Zgłoś model
1 / 5
Snap on headset holder for LG Flatron W2442PE — zdjęcie 1
1 / 5

Snap on headset holder for LG Flatron W2442PE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a69291954

a69291954

@a69291954_12353

A headset holder which simply snaps on the Frame of a Flatron W2442PE or other modells which have a similar frame.…

Ocena
0 / 5
Polubienia
3
Pobrania
21
Wydruki
0
Wyświetlenia
217
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane

A headset holder which simply snaps on the Frame of a Flatron W2442PE or other modells which have a similar frame. Since it needs tight tolerances to work i doubt it will work an other Monitors.

20160303: Update v4

  • prints without support and look much nicer after printing.

  • because it is printed standing printing time is much longer TODO: v5
    a "lighter" version with some minor improvements

    Print Settings

Printer:

UM2 Clone

Rafts:

No

Supports:

Yes

Resolution:

0.2 mm

Infill:

15%-30%


Notes:

  • as it has in overhand you have to print with support.
    • it helps if your printer has proper cooling for bridging but doesnt matter as the briged part is on the inside at the back - so it won´t be visible.

printed with PLA it was ridged enough at 15% infill

designed for telco headsets, i might come up with design for full size headsets if needed

Category: Computer

Tagi

thingiverseheadsethangerheadsetmountheadsetholder