Ender 3 V3 KE, SE, K1 Pro, K1 Max Nozzle Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle case for Ender 3 V3 KE, SE, K1 Pro, K1 Max. Will also work for Microswiss Flowtech and other nozzles.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Nozzle-shaped nozzle storage box. Holds up to 7 nozzles of approximately 6.4 mm diameter and up to 27.5 mm in length. Works with 6 mm and 7 mm size nozzle heads. Top has sufficient space to prevent contact with the nozzle tip. The one shown is filled with Microswiss Flowtech nozzles and was printed in Overture Electric Blue PETG.
Printer
Ender 3 V3 KE
Filament
PLA or PETG, although any would work (except TPU - fine threads)
Nozzle
0.4
Layer Height
0.2
Infill
10% Cross-hatch
Supports
Optional. I used manual tree supports just in the center of the lid from beneath, but it will probably bridge acceptably for most printers.
