1 / 1
Insert for monitor arm (Phone/camera mount with full rotation REMIX)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original model uses a G-clamp, I replaced the clamp with an insert for the top of a monitor arm.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
The original model uses a G-clamp, which I replaced with an insert for the top of a monitor arm. The monitor arm I use is a Neomounts by Newstar FPMA-D550D. This should be compatible with similar arms, as long as the inner diameter of the tube is similar. The diameter of the cylinder is 30.75mm, it may require a bit of sanding or a layer of tape to fit snugly.