ATX PSU fixation plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This plate is meant to be printed to screw into the ATX PSU holes pattern onto the PSU, and then screw onto another box.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
It is a plate meant to be screwed onto an ATX PSU, or another form factor, but that has the ATX PSU hole pattern. Then you can screw the plate onto something else to secure the PSU.
I use it for my wooden PC Cases, but it can be integrated in other designs.
The file was created with FreeCAD and can be customised by changing the attached spreadsheet : open the file on freeCAD, click on the “Spreadsheet" in the left menu, and you can change the values, such as the width of the excess material on the top, bottom, left and right that can be used to secure the plate onto the case.
The default provided 3mf file has two sides of 10mm, and two of 18mm, the thickness of the wood i used. You can also change the plate thickness to something else than 3mm.
In order to assemble a PC, you need some parts :
- A “case”, it may be as simple as a plywood plank of suitable dimensions (up to you);
- A PSU plate to secure the PSU in a similar context (by me);
- A PCIe bracket support to secure PCIe cards in a similar fashion (by me);
- A motherboard support, by DockGuy;