Baby Jogger City Select Pram Footrest Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this part for our Baby Jogger City Select pram, which had a missing button for adjusting the footrest.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this part for our Baby Jogger City Select pram, which had a missing button for adjusting the footrest.
V3 is the initial version. I printed it and works flawlessly.
V4 is 1.5mm shorter version, but it is the same size as the original, but it is only slightly different from the V3 version, so I didn't printed it as the V3 worked perfectly.
Supports: Yes
Resolution: 0.2
Infill: 25%
Filament: Prusa PET-G Black
Notes:
I used PrusaSlicer with selective Support Enforcers, no need for full support.
Feedback is important!
I spend countless hours perfecting and testing my designs and I would love to hear your feedback too. If you like my designs I appreaciate a like or a comment. Please post a photo if you print this.
Donations
I am open to any kind of donation if you want to support me :)
https://paypal.me/andrasbognar