MMU 5x Filament Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MMU2S Filament Filter for 5 Filaments with magnetic closure.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 977
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
To avoid a clogged nozzle I designed a filter for MMU2S with5 filaments.
The design consists of following parts:
1x Body
1x Cover
10x Fitting
4x magnet diameter 5mm, 5mm Height
All is printed in PLA. The Fittings need support. After printing, the fittings must be brought to the exact 4mm with a 4mm drill (by hand). Then glue them to the hex shaped holes in the body. Place 2 magnets in the body and 2 in the Cover. At least place two sponges (one under the filament and one above) in the body and close it.
Place the filter as close as possible to the MMU unit.