Modified Prusa Enclosure Honeycomb Storage Wall Compatible with Transport Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified piece of @per-form-3d's honeycomb storage wall that's compatible with the Prusa Enclosure transport handles
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of: https://www.printables.com/model/751395-original-prusa-enclosure-honeycomb-storage-wall
I wanted to use the transport handles on my enclosure with @per-form-3d's honeycomb storage wall installed so I shortened the top middle piece enough to not block the handles. This remix is ONLY for the top middle piece. You will need the rest of the pieces from the link above. I used an M3x16 screw where the top right honeycomb piece and the transport handle overlap (see pics).
My Print Settings:
Infill: 20%
Perimeters: 4
Layer height: 0.2
Supports: None
Filament: Overture PETG
Feel free to use different settings but just be sure the settings are the same for all 6 pieces of the honeycomb wall. As with any large project, you may encounter shrinkage and need to adjust settings accordingly
Prusa Enclosure Transport Handles: https://www.printables.com/model/252904-transport-handle-for-original-prusa-enclosure/remixes