1 / 1

Winwing Modular Joystick Extensions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło: Printables
Kategoria: Mechanical Parts
Licencja: Creative Commons — Public Domain

Szczegóły Wydruki i komentarze Remiksy Kolekcje

This modular system has been developed to allow you to mount your Winwing Joystick at different heights and positions based on your seat position.

I developed this because I wanted to fly helicopters in DCS and MSFS but couldn't find a suitable extension to allow me to mount the joystick base on the floor.

With the 50 deg angled extension you can bring the joystick closer to or further back again depending on your seating position in relation to the joystick

The following parts are available

Hotas base to Joystick adapter (Male Pipe 4)
Joystick adapter to joystick
Joystick locking nut
Straight 25mm long extension
Straight 50mm long extension
Straight 100mm long extension
50 deg Angled extension

Each of the parts are glued together with CA Glue

You are likely to need to purchase a PS/2 Male to Female Extension Cord. Determine the length you need and purchase appropriately.

I've made these parts in both PLA and PETG. PETG is likely to be a little stronger than PLA but I'm currently using parts made from PLA.