1 / 3
Unistrut Channel 41mmx41mm 1-5.8" x 1-5.8" endcap — zdjęcie 1
1 / 3

Unistrut Channel 41mmx41mm 1-5.8" x 1-5.8" endcap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Oversized endcap for 41x41 unistrut channel.

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
127
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Unistrut hurts when you walk into it, in high traffic area a wider end-cap makes sense.  Often unistrut is not perfectly cut/de-burred, so in this design that part that goes into the channel is tapered. 

Recommend printing in TPU with a moderate amount of infill ~20%. Any infill will print, just try for a balance that it can absorb some of the energy when you run into it. 

Tagi