Soffit Vent Cap for Extractor Fans - 4" Hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This vent cap is designed for mounting into the soffit to deflect the air away.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This vent cap is designed for mounting into the soffit to deflect the air away, reducing the opportunity for warm humid air to circulate back into the attic. The vent body includes an optional bug screen, and it can be installed as-is or with the vent cap deflector. This model is for a 4" hose that can be secured using a standard hose clip. I printed this in PLA and spray painted to match my soffit color.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
**Rafts:**
No
Supports:
No
**Resolution:**
0.28mm
Infill:
15%
**Filament:** Any PLA AnyPost-Printing =============
If using both the vent cap and deflector, dry fit the parts and double check the screw hole alignments. Use a 3/16th drill bit if required. To fit the bug screen, cut a 5-6" square of screen material and position it over the hose opening. Use the ring to push it in until the ring snaps into place. Cut off the excess material above the ring with a sharp blade.
Category: Household