Pentelobe Star Knob for 1/4-20 nut or hex head bolt - 3 to choose from: medium, large, and large deep
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pentelobe Star Knob for 1/4-20 nut or hex head bolt - 3 to choose from: medium, large, and large deep
- Ocena
- 0 / 5
- Polubienia
- 3
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
Pentelobe Star Knob for 1/4-20 nut or hex head bolt - three (3) to choose from:
- Medium
- Large
- Large with Deep Well
To use, insert either the ¼-20 nut or the ¼-20 hex head of the bolt into the knob. It's designed for a press fit.
I like to add a splash of color, so the knob prints with a groove or trench on the face, and I'm including a “trim insert” part that can be printed in a different color, and then CA glued into the trench. No MMU is required to get the two-color look. See the pics. These look fantastic and work fantastic.
Printing tips
- PLA
- Print as oriented
- Supports needed only on the knob (not the trim insert) and only on the portion where the nut or hex head goes. I used Tree supports in auto mode for the knobs.
- Knobs:
- Perimeter walls: recommend at least 3
- Infill: recommend 30% (I used Cubic infill at 30%)
- Trim Inserts:
- Perimeter walls: 2
- Infill: default (in my case 15%)
Additional keywords: ¼-20, quarter-20, qtr-20
ALSO CHECK OUT my design for “printable t-nuts” conversion that allowed me to use regular ¼-20 nuts and bolts as though they were t-nuts and t-bolts —for use in this “15120” aluminum extrusion:
Purchase link for the 15120 aluminum extrusion I used: https://www.aliexpress.us/item/3256808024116694.html
Link for the printable T-adapter part: https://www.printables.com/model/1176320-make-t-nuts-t-bolts-out-of-regular-14-20-hardware







I did a DIY fence upgrade for my table saw, using “15120” aluminum extrusion (15 mm thick x 120 mm tall x 1 meter in length):

I used mostly ¼"-20 bolts and nuts, and also some amount of M5 screws and M5 t-nuts.
I “made” t-nuts / t-bolts out of regular 1/4"-20 hardware using this printed adapter, as shown above. I also used the printed “Pentelobe” star knob that I designed and modeled (this listing).
Regarding the table saw fence upgrade, I saved a lot of time by leveraging the excellent design work of @stuffimade_99005 — the guy behind the @stuffimade channel on YouTube. He posted a great video about his table saw fence upgrade, and I bought his models available here: https://stuffimade.gumroad.com/l/DIYFenceSystemsFiles
Although I did have to remix some of the parts to fit my saw, and obviously I designed some parts of my own along the way, by starting with his excellent design it was way, way better than starting from scratch!