Raspberry Pi 2020 Extrusion Mount - Nail-Hole Hanger Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a raspberry pi (in a case) to any printer with 2020 extrusion frame. Or, mount anything that hangs on a nail.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Description
Fits around 2020 extrusion frame, which is common in many printers. Inside the collar are three nubs that fit inside it, fitting pretty snugly.
On the other side are two “nail” protrusions, made to fit in cases' slots designed to hang on nails. I've provided an alternate file with one “nail" hook, in case your nail holes aren't 1.75" apart like my case.
Printing
Made to be printed standing up, with no supports. Almost no overhangs over 45 degrees.
I printed at 0.30mm layer height, because I'm impatient, but I'm sure it could look real nice with a finer layer height.